Attention shall be paid to the operation of sign piles:

1、測量放線的基準點一定要采用GPS定位，其中放線基準點是指設計控製樁和水準基樁。

1. GPS positioning must be adopted for the datum point of Surveying and setting out. The datum point of setting out refers to the design control pile and leveling pile.

2、一定要按照圖紙的作業要求設置控製樁，一定要表明樁號、裏程、地麵標高、轉角高度等數據。

2. The control piles must be set according to the operation requirements of the drawings, and the data such as pile number, mileage, ground elevation and corner height must be indicated.

3、在定測資料和平麵或是斷麵圖紙上表明地下的障礙物，其次是，要保證線路和地下構築物交叉兩側的控製範圍為3米，同時，需要設置警告牌和伟德安卓。伟德安卓上需要寫上相關的數據。比如：埋深，交叉尺寸等。

3. Indicate the underground obstacles on the location survey data and plane or section drawings. Secondly, ensure that the control range on both sides of the intersection of the line and underground structures is 3M. At the same time, set warning signs and sign piles. Relevant data shall be written on the sign pile. For example, burial depth, crossing size, etc.

4、關於劃線方麵，要根據軸線和伟德安卓的界限之間拉一根繩子，撒上白石灰劃線。完成劃線，要清理現場的障礙物。

4. As for the marking, a rope shall be pulled between the axis and the boundary of the sign pile, and white lime shall be sprinkled for marking. After finishing the marking, the obstacles on the site shall be cleared.

5、關於移樁方麵，是在劃線完成之後打掃清理之前，將所有需要的線管樁平移到土堆的旁邊，範圍控製在0.3m。

5. In terms of pile moving, all required pipeline piles shall be moved to the side of the soil pile after the completion of marking and before cleaning, and the range shall be controlled within 0.3m.