In real life, we often see the highway warning pile mold with beautiful appearance on the highway. For the production of the mold, we must first prepare the tools and raw materials required for production. For the use process of the highway warning pile mold, first prepare the intact mold for docking before use to avoid liquid leakage, and then clean the inside of the mold, so as to ensure the quality of the mold and the smoothness of the production process. Apply a layer of engine oil on the surface of the mold, prepare for filling, and place the mold on the vibration platform for vibration to ensure the close combination of raw materials.

公路警示樁模具的特點

Characteristics of mould for highway warning pile

一般來書公路警示樁模具呈現長方體條狀，上麵會刻有相應的字體，而且對於公路警示樁模具來說其性能強，耐衝擊，耐老化，適溫壽命強，標誌較顯眼，模具本身的成本低，效果好，而且對於安裝方麵也是非常的方便，便於工人的施工，模具的外形也較為美觀，整個公路警示樁模具光滑度也非常的高，硬度也比較強。

Generally, the mold of the highway warning pile is in the shape of a rectangular strip, which is engraved with the corresponding font. For the mold of the highway warning pile, it has strong performance, impact resistance, aging resistance, strong temperature life, obvious signs, low cost and good effect. In addition, it is also very convenient for installation, convenient for workers' construction, beautiful shape of the mold, and the smoothness of the whole mold of the highway warning pile is also very high, The hardness is also quite strong.

公路警示樁模具的保存方法

Preservation method of mould for highway warning pile

對於公路警示樁模具的保存，不能讓模具受酸腐蝕，酸性物質與水泥中的某些物質而發生反應，生成物體積鬆散、膨脹、遇水後非常難容易水解粉化，而且對於公路警示樁模具而言不能水多灰稠，常常忽視用水量對混凝土強度的影響，施工中便於澆搗，有的時候不認真執行配合比，會將混凝土攪得很稀，而多餘的水分會在混凝土中留下孔隙，這樣會使混凝土強度降低。

For the preservation of highway warning pile molds, first of all, the molds should not be corroded by acid. Acidic substances react with some substances in cement, resulting in loose and swelling objects. It is very difficult to hydrolyze and pulverize when they meet water. In addition, the molds of highway warning piles should not be too thick with water and ash. The impact of water consumption on concrete strength is often ignored. It is easy to pour and vibrate during construction, and sometimes the mix proportion is not carefully implemented, The concrete will be diluted, and the excess water will leave pores in the concrete, which will reduce the strength of the concrete.